[User Guide] RRTR227B/2AQZU-18015 Programming and Functions Guide

Thank you for Purchasing the RRTR227B/2AQZU-18015 Ceiling Fan remote control. To view the product page, click on the link below.

https://www.anderic.com/products/anderic-tr227b-for-home-decorators-collection-ceiling-fan-remote-control

For the Dip Switch Guide, See link below.

https://www.anderic.help/article/pairing

1. Remove the remote control (I) battery cover by pressing firmly on the arrow and sliding the cover off.

2. Install two 1.5V batteries (included).

3. Replace the battery cover on the remote control (I). 

1. Remove the remote control (I) battery cover by pressing firmly on the arrow and sliding the cover off.

2. Slide the dip switches (ZZ) in the battery compartment of the remote control to your choice of either up or down. The factory setting is up.

3. Remove the rubber plug (OO) from the receiver by pulling it out.

4. Slide the dip switches (ZZ) on the receiver (H) to the same

   position as set on the remote control (I).

5. Replace the battery cover on the remote control (I).

6. Insert the silicone rubber stopper (OO) into the hole on the receiver (H) to cover the dip switches. 

Power ON/OFF: Press and release the power button to turn the fan and light on or off.

Fan speed: LEDs on the fan speed button will illuminate to the corresponding speed.

Press and release 1 time: Turn the fan speed to 4. 

Press and release 2 times: turn the fan speed to 3. 

Press and release 3 times: turn the fan speed to 2. 

Press and release 4 times: Turn the fan speed to 1. 

Press and release 5 times: Turn the fan off. 

Light ON/OFF:

Press and release the button to turn the light on or off. 

Press and hold the button to activate the dimmer function.

Comfort Breeze: Press the button to enable Comfort Breeze; this will change your fan randomly, simulating a relaxing breeze. To cancel this feature, press the fan speed button or power button.

Correlated Color Temperature (CCT) changing: Push and release the button to cycle through the six color temperature options.

1. 2700K (Warm White). 
2. 3000K (Soft White).
3. 3500K (Neutral White). 
4. 4000K (Bright White). 
5. 5000K (Daylight).
6. 6500K (Daylight Deluxe). 

Timer: 

• While the fan is on press 1 time-turns on a 2 hour run timer. 
• While the fan is on press 2 times-turns on a 4 hour run timer. 
• While the fan is on press 3 times-turns on a 8 hour run timer. 

1. Slide the screw cover plate up to remove it from the wall cradle.

2. Position the wall cradle in the desired position and attach it to the wall using the included wall cradle screws.

3. Slide the screw cover plate back onto the wall cradle to conceal the screws.